Better BT-532C - Page 11

BT-532C User manual
11
Set the left blank margin with dots
Name
Set the left blank margin with dots
Format
ASCII ：GS L nL nH
Decimal ：29 76 nL nH
Hexadecimal ：1D 4C nL nH
Description
Sets the left margin using nL and nH.
The left margin is set to [(nL+nH×256) ×0.125 mm].
Parameter range
0 ≤ nL ≤ 255，0 ≤ nH ≤ 255
Default
N/A
Supporting
model
All
Notes
This command is effective only when processed at the beginning of the line in
standard mode.
If the setting exceeds the printable area, the maximum value of the printable
area is used.
Usage example
1b 40 1d 4c 08 00
30 31 32 0d 0a
30 31 32 0d 0a
Select print mode(s)
Name
Select print mode(s)
Format
ASCII ：ESC ! n
Decimal ：27 33 n
Hexadecimal ：1B 21 n
Descriptio
n
Selects print mode(s) using n as follows:
Bit
Off/On
Hex
Decimal
Function
0
Off
00
0
Character Font A (12×24).
On
01
1
Character Font B (9×17).
1
Off
00
0
Turn white/black reverse printing mode not selected.
On
02
2
Turn white/black reverse printing mode selected.
2
Off
00
0
Turn on/off upside-down printing mode not selected.