Better BT-532C - Page 20

BT-532C User manual
20
 Set a corresponding bit to 1 to print a dot or 0 not to print a dot.
 This command can define different user-defined character patterns for
each font. To select a font, use ESC !
 User-defined characters and a downloaded bit image cannot be defined
simultaneously. When this command is executed, the downloaded bit
image is cleared.
 The user-defined character definition is cleared when:
1）ESC @ is executed.
2）GS * is executed.
3）ESC ? is executed.
4）The power is turned off.
When Font A (12×24) is selected.