5
better be safe
EN
2 better be safe
2.1 Intended use
The betterLink is a docking platform for using electrical
power from up to three betterPacks indoors and outdoors.
betterPacks can also be charged using the betterLink.
The betterLink needs to be combined with the betterUI,
the control and monitoring unit, and one or multiple
betterPacks, the mobile power solution. Never use batteries
other than betterPacks with the betterLink.
The betterLink is intended for professional use only and may
be used under the specific operating and environmental
conditions defined in this user manual see “3.2 Conditions
for the installation site” on page 6 and see “9 Technical
Data” on page 11.
Any further use that deviates from these conditions de-
scribed in this user manual is considered improper use and is
prohibited. Note in particular the following specification:
• Never step on the betterLink and never use it as a step-
ping aid.
2.2 Disclaimer
Failure to follow the instructions in this user manual may re-
sult in serious injury or damage to the betterLink. No liability
is accepted for damage to the betterLink that occurs because
the instructions in this user manual have not been observed.
2.3 Safety instructions
DANGER
Danger to life due to electric current!
The betterLink is operated with electric current.
Contact with live parts and damage to individual
components pose an immediate danger to life.
• Always check that the betterLink is not
damaged before using it. Never use the
betterLink if it is damaged.
• Never open, repair or modify the betterLink.
Always contact the manufacturer to have it
repaired.
• Never touch the plug of an appliance with
wet hands.
• Never put external conductors into the
plugs.
• Never immerse the betterLink in water.
CAUTION
Physical injuries due to the betterLink tipping
over!
If the betterLink is not standing securely and
level or betterPacks are not stacked or removed
correctly, the betterLink may tip over and cause
bruises to hands, feet or legs.
• Always handle the betterLink with care.
• Always follow the instructions for setting up
the betterLink and changing the betterPacks
correctly.
NOTICE
Damage to equipment due to dirty or wet
connections and plugs!
If connections and plugs get dirty or wet, the
betterLink may no longer function correctly.
• Always keep the connections and plugs
clean and dry by using dust caps and keep-
ing plugs away from dust and water.
• Check connections regularly and clean
them if necessary see “5 Cleaning” on
page 9.
2.4 If a product is broken
Never open, repair or modify the betterLink yourself. Always
contact the manufacturer to have it repaired.
Phone: +49 152-05735306
E-Mail: info@betteries.com
To Next Page
Loading...