betteries betterLink - Charging betterPacks; Maintenance and Support

9
EN
Using / Cleaning
4.4 Charging betterPacks with the
betterLink
✓ betterPacks are securely stacked on the betterLink.
To charge betterPacks on the betterLink, you need an
additional adapter that you connect to a charging device
via the power cable. Only use a charging device provided by
betteries. Always follow the instructions of the manufacturer
of the adapter and follow the information given in the user
manual of the charging device.
4.5 Using appliances
✓ The appliance is turned o.
✓ Data cable, power cable and the plug of the appliance are
securely connected.
✓ One or multiple betterPacks are charged and securely
stacked on the betterLink.
Fig. 11 On/O button on the betterUI.
1. Turn on the betterUI by pressing the On/O button.
2. Turn on the appliance. Always follow the instructions
provided by the manufacturer of the appliance.
3. If you notice a problem with the appliance, switch o
the appliance immediately and disconnect it from the
betterLink.
4. Contact the manufacturer of the appliance for informa-
tion on how to have the appliance repaired.
5 Cleaning
DANGER
Danger to life due to electric current!
The betterLink is operated with electric current.
Contact with live parts poses an immediate
danger to life.
• Always disconnect the betterLink from the
betterUI, all stacked betterPacks and all
appliances before cleaning the betterLink.
• Never immerse the betterLink in water.
• Never use a high-pressure water jet to clean
the betterLink and never spray water direct-
ly on the betterLink.
NOTICE
Equipment damage due to improper cleaning
agents!
Using unsuitable cleaning agents, solvents or
other chemicals for cleaning the betterLink may
damage it.
• Only use a dry so brush or cloth to clean
the betterLink.
• Only use canned air or compressed air that
is specifically approved for cleaning or
dusting electronic equipment to clean plugs
and connections.
1. Clean the outer surfaces of the betterLink regularly with a
dry so brush or cloth.
2. Check if plugs or connections are dirty and, if necessary,
clean them with approved canned air or compressed air.
3. While cleaning, check for visible damage. If you notice
any damage, do not use the betterLink and contact
the manufacturer  see “2.4 If a product is broken” on
page 5.