Beurer BM 53 - Accessories and Replacement Parts; Troubleshooting; Error Messages and Solutions

38
• Under no circumstances hold the device or cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy ob-
jects on the device and cuff. The cuff line should not be
bent sharply.
• Remove the batteries if the device is not going to be used
for a long period of time.
8. ACCESSORIES AND
REPLACEMENT PARTS
Accessories and replacement parts are available on the
homepage www.beurer.de, under “Service”. Please state the
corresponding order number.
Designation Item number and/
or order number
Universal cuff 164.503
Mains adapter (EU) 072.78
Mains adapter (UK) 072.79
9. TROUBLESHOOTING
Error
message
Possible
cause
Solution
Unable to re-
cord a pulse.
Please wait one minute and
repeat the measurement.
Ensure that you do not
speak or move during the
measurement.
The measured
blood pressure
is outside the
measurement
range.
There is a
pneumatic
system error.
Repeat the measurement.
Ensure that the cuff line is
correctly connected and
that you do not move or
speak.
An error oc-
curred during
the measure-
ment.
Please wait one minute and
repeat the measurement.
Ensure that you do not
speak or move during the
measurement.