11
With kind regards,
Your Beurer Team
1. Getting to know your instrument
The upper arm blood pressure monitor is used for non-inva-
sive measurement and monitoring of adults’ arterial blood
pressure. This allows you to quickly and easily measure your
blood pressure and to display the last recorded measure-
ment. The values determined are classified and graphically
evaluated according to WHO guidelines.
Blood pressure measurements determined by this mon-
itor are equivalent to those obtained by a trained observer
using the cuff/stethoscope auscultation method, within the
limits prescribed by the U.S. Department of Health and Hu-
man Service (World Health Organization; WHO).
It is recommended to check the performance every 5 years
or after repair. Please contact customer service.
2. Important information
Signs and symbols
The following symbols are used in these instructions for
use, on the packaging and on the type plate for the device
and accessories:
Caution
Note
Note on important information
Follow instructions for use
Type BF applied part (cuff only)
Direct current
To Next Page
Loading...
