EasyManua.ls Logo

Beurer FT 100 - Forehead Measurement; Beurer Tip

Beurer FT 100
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
Illuminated display
You can also activate the illuminated display manually by briefly pressing the LIGHT/
SET button.
The display lights up for 5 seconds.
The automatic and manual illuminated display cannot be used while measure-
ment is in progress.
8. Forehead measurement
Beurer tip
Remember:
• P
hysical activity, increased perspiration on the forehead, taking vasoconstrictive
medication and skin irritations can distort the measurement.
• T
he forehead, or the temples, must be free from perspiration and cosmetics.
•
W
e recommend that you take three measurements on the forehead. If the three
measurements are dierent, use the highest value.
• I
f the forehead area is covered in hair, sweat or dirt, clean the area and then wait
for 10 minutes to improve the precision of the measurement.
•
I
t is important that you keep the thermometer still during measurement. Moving the
thermometer during measurement may cause imprecise measurements.

Table of Contents