14
Forehead temperature mode
If the measurement is over 38°C (100.4°F), appears in the display to indicate that the body tem-
perature is above the normal range.
Fig. 13
The measurement is automatically saved with the date/time and the “fever” / “no fever” classification.
The device is ready to take another measurement when two short beeps sound and the forehead symbol stops flashing.
The device automatically switches o after approx. 60 seconds or you can press the / SCAN button for 5 seconds to
switch it o.
Displaying stored measurements
The device only stores measurements in forehead temperature mode . The device automatically stores the values from the
last 60 measurements.
When 60 memory spaces are exceeded, the oldest value is deleted.
• T
he memory can be called up as follows:
•
With the thermometer switched on, press and hold the MODE/MEM button for 3 seconds.
The most recent measurement is displayed.
•
Pressing the MODE/MEM button again will display the measured value.
• I
n the upper line, the time and date are displayed alternately.
To Next Page
Loading...
