Beurer FT 95 - Parts and Controls Overview; Device Components and Buttons

12
4� Parts and Controls
1 LCD Display
2 MODE/MEM button
3
button
4 LIGHT/SET button
5 START button
6 Fever indicator
7 Measuring sensor
8 Battery Compartment
Buttons Functions
MODE/MEM
MODE Sets the measurement mode.
MEM
Displays the stored measurements.
LIGHT/SET
LIGHT Turns LCD Display backlight on and o.
SET Sets the basic functions.
Press to switch device on/o.
START Press to measure temperature.
Fever Indicator Illuminates green/yellow/red depending on the measured temperature.
8
7
1
2
4
5
3
6