User Manual for BM Refrigerators Beverage-Air
Rev. 08/20 Beverage-Air 9
USING THE UNIT
Operation is simple, just keep it connected to the correct
power supply and the refrigerator will maintain the
internal temperature it has been set to. Keep the door
closed as much as possible to avoid unnecessary run time.
NOTE: Once the unit has been started and reaches proper
storage temperatures, it may be loaded with product.
No provision is made in the cabinets to quickly pull
a keg of beer down to temperature. Best results are
obtained when a pre-chilled keg is used. Otherwise it
can take several hours to reduce the keg to the desired
temperature.
Adjusting the set temperature lower will NOT cause the
system to lower the temperature faster. When on, the
refrigeration system is always operating at maximum.
The internal fan will remain on when ever the unit is
connected to power.
The compressor and condenser fan motor will only be on
when the controller senses an increase in internal cabinet
temperature passed the set point.
To Next Page
Loading...
