Bezzera BZ02 PM - Water Supply Connection (BZ02 R); Drain Connection (BZ02 R)

30
cod.9941038.01 ed.02/04 rev.01
BZ02PM_BZ02DE
English
4.2.2 Water Supply Connection (BZ02 R)
Make sure that the water supply installation is connected to drinkable water supply
with operating pressure ranging from 0 to 5 bar.
Provide an intercepting tap upstream the machine connection (fig. 1; pos. 14).
A nipple G 3/8 “ is provided for the water supply connection (fig. 1; pos. 14).
Warning: Should the pressure be above 5 bar, provide a pressure reducer.
4.2.3 Drain Connection (BZ02 R)
Connect a rubber pipe with inner diameter of 10 mm to the arranged connector of the
machine drain well (fig.1; pos. 13) and join it with the open drain-trap, previously
prepared.