36
cod.9941038.01 ed.02/04 rev.01
BZ02PM_BZ02DE
English
7 TROUBLE SHOOTING
PROBLEM DIAGNOSTICS/SOLUTION SUGGESTIONS
The steam pipe nozzle is
obstructed, clear it by
using a pin. This problem
depends on the
introduction of the spout
into the milk.
Clean the steam spout
after using it.
LACK OF STEAM
DISTRIBUTION FROM
THE PIPE
DIFFICULT
POSITIONING OF THE
FILTER HOLDER ON
THE COUPLING RING
The problem depends on
the excessive coffee dose
inside the filter holder.
LEAKAGE FROM THE
FILTER HOLDER
Possible causes:
1-The lower bowl gasket
is worn or encrusted.
2-The filter holder is
positioned incorrectly on
the group.
3-The filter into the filter
holder is damaged.
In all above-mentioned
cases, call a skilled
technician.
The filter holder can not
be positioned.
INCORRECT
POSITIONING OF THE
FILTER HOLDER AFTER
PLACING IT ONTO THE
GROUP
The filter holder handle,
after fixing it to the group,
is turned to the right more
than usual. The lower
bowl gasket is worn.
Contact a skilled
technician to replace the
lower bowl gasket.
To Next Page
Loading...
