EasyManua.ls Logo

Bezzera BZ02 PM - Maintenance; Safety Rules; Machine Cleaning; Scheduled Inspections

Bezzera BZ02 PM
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
cod.9941038.01 ed.02/04 rev.01
BZ02PM_BZ02DE
English
6 MAINTENANCE
For a proper working of the machine follow the maintenance instructions given below.
6.1 Safety Rules
Do not wash the machine with water jets.
Disconnect the machine by positioning the omnipolar lever switch to OFF and turn off
the water knob before carrying out maintenance and/or cleaning operations.
In case of malfunctioning machine, do not carry out any temporary repair and call
immediately the technical assistance service.
Should the power supply cable be damaged, switch off immediately the machine, stop
the water supply and ask for the technical assistance service. Do not replace it by
yourselves.
Carry out the cleaning/maintenance when the machine is cold, wearing preferably,
protective gloves.
6.2 Machine Cleaning
Clean the following pieces: steam nozzle and hot water dispenser (every time they are
used), filter holder and filter, grills of warmer and drain tray.
6.3 Scheduled Inspections
Wash the group every 15 days as follows: clasp the holder of the blind filter to the
group and press many times the touch-key (fig. 1; pos. 6).
Press the key “PROG” (fig. 2; pos. 1) several times for version BZ02 DE.
N.B.: You can put special powder detergents for coffee machines in the blind filter.
Inspect every day the small basin placed under the drain tray.
To ask for technical assistance, apply to area agent.

Table of Contents

Related product manuals