What to do if work is required on live parts of BFI Automation Scanner?
If work is required on live parts, a second person has to be assigned who can disconnect the power supply in case of an emergency. Make sure to only use insulated tools!
What to do if fuses must not be repaired or bridged in BFI Automation 2.0L?
If fuses must not be repaired or bridged, only use original fuses with the specified current!
What to do if defects or faults ascertained in BFI Automation 2.0L?
Check the device in regular intervals. Any defects or faults ascertained have to be corrected immediately. Switch off the device until the defects have been corrected.
What to do if there is a danger to life caused by electrical current in BFI Automation 2.0L Scanner?
Prior to any work on the electrical equipment, disconnect the flame amplifiering system from the power supply network!
Covers manual introduction, safety warnings, warranty, liability, and operating company obligations.
Details intended use, safety instructions, safety devices, and personnel requirements for safe operation.
Lists key features, electrical, optical, mechanical specifications, and device design with block diagram.
Provides instructions for physical installation, electrical connection, and storage of the flame scanner.
Explains the operational principles based on spectral analysis of UV-VIS and IR radiation.
Describes necessary testing procedures and guidelines for operating the flame scanner.
Details maintenance needs, noting the device requires no specific maintenance beyond external cleaning.
Lists common problems, their causes, and recommended remedies for troubleshooting the flame scanner.
Provides information on ordering different flame scanner configurations and their material numbers.
Lists available accessories for the flame scanner and their corresponding material numbers.
General| Brand | BFI Automation |
|---|---|
| Model | 2.0L |
| Category | Scanner |
| Language | English |
To Next Page
