Transport, installation and connection
4-5
technol ogy for your f ut ure
Automation
BFI
Type
Ser.-No.:
24Vdc
Germany
1
3
4
2
4.6 Installation
All installation and connection work may be carried
out by qualified and approved specialist staff only !
The legal regulations as well as adjustment instruc-
tions of the plant operator have to be observed !
1 Flame scanner
2 SKL-probe
3 Swivel nut
4 Fibre optic cable
The sighting tube connection has been provided
with a G1" internal thread.
In order to ensure perfect flame amplifiering, the
correct and low-vibration position of the sighting
tube relative to the flame is essential. The SKL-
probe has to be aligned in such a way that a perfect
visual image is set. For this purpose use the optical
adjusting device (available as an accessory) as
shown in the following illustration.
To Next Page
Loading...