Technical data
3-1
3 Technical data
3.1 General characteristic features
• Flame scanner with integrated amplifier and flame re-
lay
• Tested by the German Technical Inspection Associa-
tion TÜV, approved by DIN DVGW
• For continuous, intermittent and 72-hours operation
• Type UV, UV1: For monitoring gas and oil-fired burn-
ers in the UV range
• Type IR (VIS-IR): For monitoring oil, coal and mixed-
fuel burners
• Type IR1 (IR): For flames of all kinds (also residues,
H2S and special gases)
• Type IR2: For monitoring gas and oil-fired burn-
ers in the IR range
• Two-channel flame monitoring system
• Sensitivity adjustable separately for both channels by
software
• Analog output flame intensity 0(4) to 20 mA
• Flame analysis possibility by software
• LED status display for flame relay and flame intensity
• No additional wiring to external flame amplifiers
• Type of protection IP 65
• Suitable for safety related applications up to SIL 3 (ac-
cording to IEC 61508)
To Next Page
