BFT ARGO BT A 20 User Manual

D814038 0AA00_03 20-12-19
ARGO BT A
20-35
ISTRUZIONI D’USO E DI INSTALLAZIONE
INSTALLATION AND USER’S MANUAL
INSTRUCTIONS D’UTILISATION ET D’INSTALLATION
INSTALLATIONS-UND GEBRAUCHSANLEITUNG
INSTRUCCIONES DE USO Y DE INSTALACION
GEBRUIKS- EN INSTALLATIEAANWIJZINGEN
AUTOMAZIONI PER PORTE SEZIONALI INDUSTRIALI
OPERATORS FOR INDUSTRIAL SECTIONAL DOORS
AUTOMATISMES POUR PORTES MULTI-LAMES INDUSTRIELLES
AUTOMATISCHE ANTRIEBE FÜR INDUSTRIE-SEKTIONALTORE
AUTOMATISMOS PARA PUERTAS SECCIONALES INDUSTRIALES
AUTOMATISERINGEN VOOR INDUSTRIËLE OPDRACHTGERICHTE DEUREN
Attenzione! Leggere attentamente le “Avvertenze” all’interno! Caution! Read “Warnings” inside carefully! Attention! Veuillez lire attentivement les Avertissements qui se trouvent à l’intérieur!
Achtung! Bitte lesen Sie aufmerksam die „Hinweise“ im Inneren! ¡Atención¡ Leer atentamente las “Advertencias”en el interior! Let op! Lees de “Waarschuwingen” aan de binnenkant zorgvuldig!

BFT ARGO BT A 20 Specifications

General

Power Supply	230 V
Frequency	50 Hz
Operating Temperature	-20°C to +55°C
Limit Switch Type	Encoder
Operating Cycle	Intensive use
Protection Level	IP44
Voltage	230 V
Protection Rating	IP44
Motor Power Supply	230 V
Impact Reaction	D-Track
Control Type	Remote control
Safety Features	Obstacle detection

Summary

Installation Overview

Standard Ceiling Installation

Higher Ceiling Installation

Rail Mounting

Ceiling Rail Bracket Fixing

Rail Fixing Methods

Component Assembly and Special Installations

Towing Arm and Head Assembly

90-Degree Head Installation

Initial Setup and Safety

Start-up Procedure

Guides the user through the initial activation and setup with the cover closed.

Safety Warnings

Important safety notes regarding force measurement and obstacle detection during setup.

Control Board and Connections

Terminal Descriptions

Explains the function of each terminal on the control board.

Connector and Display Overview

Safety Input Configurations

Illustrates safety input setup for photocells and edges.

Detailed Start-up Sequence

Start-up Procedure Steps

Provides a visual guide to the initial start-up and configuration process.

Transmitter Management

Manual Transmitter Programming

Instructions for programming transmitters directly via the control unit.

Remote Transmitter Programming

Procedures for programming transmitters remotely.

Transmitter Cancellation

Control Unit Interface

Menu Navigation Guide

Explains how to navigate menus using control buttons.

Diagnostics Codes and Meanings

Lists error codes, descriptions, and troubleshooting notes.

System Configuration

Parameter Menu Definitions

Details available parameters for motor configuration and settings.

Logic Menu Options

Explains logic settings for door operation and outputs.

Advanced Configuration Options

Input/Output Configurations

Expansion Module Settings

Advanced System Settings

Code and Protection Level Settings

Operational and Safety Input Settings

Expansion and Input/Output Details

Expansion Module Configurations

Auxiliary Output and Command Input Settings

Safety Input Configuration Details

Safety Logic and Radio Control

Advanced Safety Logic Settings

Radio Channel Control Options

Configuration options for radio channels and control logic.

Radio Menu Functions

Explains functions like adding/erasing keys and reading receiver codes.

Technical Specifications

Electrical Data

Technical details on power, fuses, and operating temperature.

Mechanical Data

Specifications for force, size, speed, and noise.

Receiver Specifications

Installation Preliminary Checks