BFT ARGO BT A 35 User Manual

D814038 0AA00_03 20-12-19
ARGO BT A
20-35
ISTRUZIONI D’USO E DI INSTALLAZIONE
INSTALLATION AND USER’S MANUAL
INSTRUCTIONS D’UTILISATION ET D’INSTALLATION
INSTALLATIONS-UND GEBRAUCHSANLEITUNG
INSTRUCCIONES DE USO Y DE INSTALACION
GEBRUIKS- EN INSTALLATIEAANWIJZINGEN
AUTOMAZIONI PER PORTE SEZIONALI INDUSTRIALI
OPERATORS FOR INDUSTRIAL SECTIONAL DOORS
AUTOMATISMES POUR PORTES MULTI-LAMES INDUSTRIELLES
AUTOMATISCHE ANTRIEBE FÜR INDUSTRIE-SEKTIONALTORE
AUTOMATISMOS PARA PUERTAS SECCIONALES INDUSTRIALES
AUTOMATISERINGEN VOOR INDUSTRIËLE OPDRACHTGERICHTE DEUREN
Attenzione! Leggere attentamente le “Avvertenze” all’interno! Caution! Read “Warnings” inside carefully! Attention! Veuillez lire attentivement les Avertissements qui se trouvent à l’intérieur!
Achtung! Bitte lesen Sie aufmerksam die „Hinweise“ im Inneren! ¡Atención¡ Leer atentamente las “Advertencias”en el interior! Let op! Lees de “Waarschuwingen” aan de binnenkant zorgvuldig!

BFT ARGO BT A 35 Specifications

General

Brand	BFT
Model	ARGO BT A 35
Category	Garage Door Opener
Language	English

Summary

Motor Installation Procedures

Standard Ceiling Mounting

Instructions for mounting the motor on a standard ceiling height.

Extended Ceiling Mounting

Instructions for mounting the motor on a higher ceiling with extensions.

Balancing the Sectional Door

Ensuring the sectional door is properly balanced before motor installation.

Mechanical Assembly

Rail Assembly Guide

Step-by-step instructions for assembling the drive rail.

Mounting the Rail System

Ceiling Rail Bracket Fixing

Procedure for attaching the rail support bracket to the ceiling.

Ceiling Rail Fixing Methods

Methods for securing the drive rail to the ceiling, with and without brackets.

Component Connection and Special Installations

Towing Arm and Head Assembly

Initial Setup and Safety Verification

Start-Up and Auto-Set Procedure

Steps for initial system start-up, including auto-setting the motor.

Safety Force and Obstacle Warnings

Important warnings regarding impact force measurement and obstacle detection during setup.

Electronic Connections and Programming

Terminal Overview and Optional Connections

Terminal Functionality Details

Multilingual Terminal Definitions

Transmitter Management

Manual Transmitter Programming

Remote Transmitter Programming

Transmitter Cancellation

System Configuration and Diagnostics

Diagnostic Codes and Troubleshooting

Parameter and Logic Settings

Input/Output and Radio Configuration

Advanced Settings and Options