BFT RIGEL 6 - Radio Menu Configuration

D812865 00100_04
46 - RIGEL 6
INSTALLATION MANUAL
Logic Denition Default
Cross out
setting
used
Optional extras
SAFE 2
Conguration of
safety input SAFE 2.
74
6
3
Input congured as Phot op test (tested photocell active during opening only).
4 Input congured as Phot cl (photocell active during closing only).
SAFE 3
Conguration of
safety input SAFE 3.
77
2
5 Input congured as Phot cl test (tested photocell active during closing only).
6 Input congured as Bar, safety edge.
SAFE 4
Conguration of
safety input SAFE 4.
79
4
7 Input congured as Bar, tested safety edge.
8 Input congured as Bar 8k2 (Inactive on SAFE 3,4,5,6).
SAFE 5
Conguration of
safety input SAFE 4.
79
0
9
Input congured as Bar OP, safety edge with inversion active only while opening. If while closing, the
movement stops.
10
Input congured as Bar OP TEST, safety edge tested with inversion active only while opening. If while
closing, the movement stops.
SAFE 6
Conguration of
safety input SAFE 6.
84
6
11
Input congured as Bar OP 8k2, safety edge with inversion active only while opening. If while closing, the
movement stops.
(Inactive on SAFE 3,4,5,6).
12
Input congured as Bar CL, safety edge with inversion active only while closing. If while opening, the
movement stops.
13
Input congured as Bar CL TEST, safety edge tested with inversion active only while closing. If while opening,
the movement stops.
14
Input congured as Bar CL 8k2, safety edge with inversion active only while closing. If while opening, the
movement stops.
(Inactive on SAFE 3,4,5,6).
IC 1
Conguration of
command input IC 1.
61
0
0 Input congured as Start E.
1 Input congured as Start I.
IC 2
Conguration of
command input IC 2.
62
4
2 Input congured as Open.
3 Input congured as Close.
IC 3
Conguration of
command input IC 3.
64
2
4 Input congured as Ped.
5 Input congured as Timer.
IC 4
Conguration of
command input IC 4.
65
3 6 Input congured as Timer Pedestrian.
1ch
Conguration of the
1st radio channel
command
0
0 Radio control congured as START E.
1 Radio control congured as Start I.
2 Radio control congured as Open.
2ch
Conguration of the
2nd radio channel
command
9
3 Radio control congured as Close
4 Radio control congured as Ped
5 Radio control congured as STOP
6 Radio control congured as AUX0 **
3 ch
Conguration of the
3rd radio channel
command
2
7 Radio control congured as AUX1 **
8 Radio control congured as AUX2 **
9 Radio control congured as AUX3 **
4 ch
Conguration of the
4th radio channel
command
5
10 Radio control congured as EXPO1 **
11 Radio control congured as EXPO2 **
AUX 0
Conguration of
AUX 0 output. 20-21
6
0 Output congured as monostable Radio Channel.
1 Output congured as SCA (gate open light).
2 Output congured as Courtesy Light command.
AUX 1
Conguration of
AUX 1 output.
22-23
3
3 Output congured as Zone Light command.
4 Output congured as Stair Light
5 Output congured as Alarm
AUX 2
Conguration of
AUX 2 output.
24-25
1
6 Output congured as Flashing light
7 Output congured as Latch
8 Output congured as Magnetic lock
AUX 3
Conguration of
AUX 3 output.
26-37
0
9 Output congured as Maintenance
10 Output congured as Flashing Light and Maintenance.
11 Not used
12 Not used
13 Output congured as Gate Status
14 Output congured as Bistable Radio Channel
15 Output congured as timed Radio Channel
LOCK
Type of lock.
28-29
0
0
Output congured as 12V
solenoid latch.
1
Output congured as 12V
magnetic lock.
FIXED CODE
Fixed code 0
0
Receiver is congured for operation in rolling-code mode.
Fixed-Code Clones are not accepted.
1
Receiver is congured for operation in xed-code mode.
Fixed-Code Clones are accepted.