EasyManuals Logo

BFT VIRGO Installation Manual

BFT VIRGO
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
MANUALE D’USO
2) SICUREZZA
ATTENZIONE! L’attuatore VIRGO non è dotato di
regolazione meccanica di coppia. È obbligatorio
utilizzare un quadro di comando del medesimo
costruttore, conforme ai requisiti essenziali di sicu-
rezza delle direttive 2006/95/CEE, 2004/108/CEE,
2006/42/CEE e dotato di adeguata regolazione
elettrica della coppia.
3) MANOVRA DI EMERGENZA (Fig.1)
In caso di assenza di tensione di rete o anomalie di
funzionamento, la manovra manuale di emergenza
può essere eseguita agendo sulla leva di sblocco
esterna (Fig.1 rif.”S”).
1) Inserire la chiave di sblocco e ruotarla in senso orario
(Fig.1 rif.”1”).
2) Azionare la leva “S” no ad ottenere lo sblocco
(Fig.1 rif.”2”).
3) Mantenere la leva in posizione di sblocco con
una rotazione antioraria della chiave (Fig.1 rif.”3”).
4) Spingere lentamente l’anta per aprire o chiudere
il cancello.
Per riattivare il funzionamento motorizzato,ruotare
la chiave in senso orario in modo da liberare la leva
dalla posizione di sblocco e riportarla nella posizione
iniziale di normale funzionamento.
ATTENZIONE! Prima di attivare la manovra manuale
vericare che ciò non possa causare una situazione
pericolosa.
USER’S MANUAL
2) SAFETY
ATTENTION! The VIRGO model controller is not
equipped with mechanical torque adjustment. It
is compulsory to use a control panel of the same
manufacturer, in compliance with the basic safety
requirements of directives 2006/95/CEE, 2004/108/
CEE, 2006/42/CEE equipped with appropriate elec-
tric adjusment of the torque.
3) EMERGENCY MANOEUVRE (Fig. 1)
In the case where the power supply is o, or any faults
are present, the manual emergency manoeuvre
can be carried out by operating the external
release lever (Fig.1 ref.”S”).
1) Insert the release key and turn it clockwise (Fig.1
ref.”1”).
2) Move lever “S” until the lock is released (Fig.1
ref.”2”).
3) Keep the lever in the release position by turning
Fig. 1
S
the key clockwise (Fig.1 ref.”3”).
4) Push the leaf slowly to open or close the gate.
To reactivate motor-driven operation, turn the
key clockwise to free the lever from its released
position, then return it to its initial position for
normal operation.
WARNING! Before carrying out the manual ma-
noeuvre make sure that this operation will not cre-
ate dangerous situations.
MANUALE D’USO / USER GUIDE:EMERGENCY OPERATION-
MANUEL D’UTILISATION
/ BEDIENUNGSHANDBUCH
MANUAL DE USO / MANUAL DE USO
VIRGO - 55
D811415_09

Other manuals for BFT VIRGO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BFT VIRGO and is the answer not in the manual?

BFT VIRGO Specifications

General IconGeneral
Power Supply230 V
Motor Voltage24 V
Max Leaf Length2.5 m
Max Leaf Weight200 kg
Max Gate Weight400 kg
Max Gate Length5 m
TypeElectromechanical
Safety DevicesPhotocells

Related product manuals