Art. 3213
8-piece Air Hammer Kit
Technical Data
Chisel shan
k: Ø 10 mm
Chisel shank length: 133 mm
Blow per minute: 4500
Working pressure: 90PSI
Air consumption: 4CFM (90PSI)
Air Inlet: 1/4“ PT
Stroke: 41 mm
Noise: LpA: 84 dB (A)
LwA: 95 dB (A)
Vibration: ahd = 9,4 m/s²
K = 1,5 m/s²
Weight: 1,1 kg
Please read
these instructions carefully before use or maintain the air tool described. Keep
instructions for future reference.
Description
This air hammer is designed for cutting through rusted metal or bolts and removing mortar from
cement blocks or bricks.
General Safety
1. This air hammer is a part of a high pr
essure system. Do not exceed maximum operating pressure
of the air tool (90 PSI – 6,2 BAR). The hammer could explore and result in death or serious injury
.
2.
Disconnect the air drill from air compressor before changing tools or accessories, servicing and
during non o
peration.
3. Always ear
safety glasses and using hearing protection during operation
.
4.
Do not wear loose fitt
ing clothing and jewelry which may become
caught in moving parts and
result in serious injury.
5.
Do not depress trigger when connecting the air hose.
6. Never trigge
r the tool when not applied to a work object. Accessories must be secure
ly attached.
7.
Make sure spring retaine
r, all connections are secure and check air hoses for weak o
r worn
condition before each use.
8.
WARNING !
!! Disconnect air supply before installing or any maintenance notes.
To Next Page
Need help?
General
