BGS technic 8717 User Manual

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8717
SAND BLAST CABINET
Please read instructions before operation the blasting system.
Failure to follow these instructions could result in operator injury and damaged to the sand blasting
cabinet.
The sand blast cabinet will produce a powerful flow of abrasive particles.
To avoid personal injury and property damage study this manual thoroughly before assembling,
operating or servicing this sand blast cabinet. This sand blast cabinet is designed for cleaning,
polishing and finishing with dry abrasive ONLY, such as glass bead or plastic granule abrasives.
The finishes can vary from course to fine according to the sizing of the glass bead on delicate parts.
Start out with minimal air pressure to avoid unnecessary excessive abrasion.
Do Notice this sand blasting system is equipped with a 3-prong grounded plug for protection against
shock. When connecting your unit obey all applicable electrical and safety codes. The blasting system
should be only plugged into an adequately grounded 3-prong receptacle. Abrasive media is very
slippery and should be cleaned up immediately to avoid possible operator injury.

BGS technic 8717 Specifications

General

Brand	BGS technic
Model	8717
Category	Power Tool
Language	English

Summary

Sand Blast Cabinet Introduction and Safety

General Safety Precautions

Essential safety guidelines to prevent injury and damage during operation of the blast cabinet.

Sand Blast Cabinet Assembly Part 1

Mounting Steps 1-6

Connecting panels, base, screen, glove, and lamp assembly for the sand blast cabinet.

Sand Blast Cabinet Assembly Part 2

Mounting Steps 7-10

Assembling blast gun, lid, and positioning chain for the sand blast cabinet.

Sand Blast Cabinet Operation and Parts

Operating Procedures

Step-by-step guide for using the sand blast cabinet during operation.

Parts Identification List

List of all components and parts with their corresponding numbers for reference.

Sand Blast Cabinet Maintenance and Troubleshooting

Troubleshooting Plugged Conditions

Guidance on resolving issues with plugged nozzles or hoses due to moist media.

Addressing Wear and Performance Issues

Identifying and resolving wear-related problems affecting blasting performance.

Replacing the Transparent PVC Board

Procedure for replacing the clear protective board on the top lid.

Sand Blast Cabinet Compliance

EC Declaration of Conformity

Formal statement of compliance with relevant EU directives and standards.