SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8473
3/8" Reversible Air Ratchet
SPECIFICATION
Drive: 3/8”
Max. torque: 45 Nm
Max. air pressure: 90 PSI
Average air consumption: 3.9 CFM
Max. speed: 300 RPM
Air inlet: 1/4"
Length: 144 mm
Weight: 500g
IMPORTANT SAFETY INFORMATION
CAUTION!
Read, understand and follow all instructions and war
nings before first use of this air ratchet. Disregard
might cause property damage and/or personal injury as well as expiration of warranty.
Grease the air ratchet with 4 to 5 drops of air tool lubricant before each use.
Only connect with air pressure systems that provide an appropriate air pressure as well as sufficient
air capacity (L/min) for this tool.
1. Make sure that the tool is in OFF-position, when connecting it with the air pressure system.
2. Always wear certified safety gloves and goggles. Stirred up dust might make wearing a suitable
respirator mask a necessity.
3. Use air tool accessories only (e.g.: Do not use ordinary bits for an air driven impact wrench, but
special impact bits)!
4. Cut the ratchet from the air supply before you install accessories, service the tool or when not in
use.
5. Always stick to your common sense! Do not wear loose clothes or jewelry which might be caught
up in revolving parts because this might lead to injuries. Operate the tool in a safe distance from
yourself and others.
6. Follow manufacturer’s notes when installing regulators, filters and other accessories.
To Next Page
Loading...
Need help?
General
