BGS technic 950 - User Manual

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 950
Digital Torque Wrench
SPECIFICATIONS
Model Nr.
BGS 950
BGS 951
BGS 952
Accuracy
± 2 %
± 2 %
± 4 %
Square Driver
12.5 mm (1/2")
10 mm (3/8")
6.3 mm (1/4")
Torque Range
40-200 Nm
27-135 Nm
6-30 Nm
Resolution
0.1
0.1
0.1
Size
480 x 40 x 40 mm
380 x 35 x 35 mm
290 x 35 x 35 mm
Weight
1.05 kg
0.66 kg
0.4 kg
Memory
50 data sets of memory capacity
Operation Modes
Peak or Trace
Unit Selection
Kg-cm, Kg-m, Ib-in, Ib-ft, N-m
Battery
1.5V AAA (2 pcs)
Operation Temperature
-10°C ~ 60°C (13.9°F ~ 139.9°F)
Storage Humidity
-20°C ~ 70°C (-4°F ~ 157.9°F)
Operation Humidity
15% ~ 90%
Auto Shut Off
After 80 seconds of no use
IMPORTANT
Read this manual before operating the torque wrench. Failure to follow instructions listed in this guide
may result in damage of electrical system, wrong torque setting and/or serious injury
FEATURES
• 50 data sets of memory capacity
• 2 LEDs red / green for visual alerting
• 72 gear teeth
• Standard functions: torque setting, measurement setting, mode setting
• Operation in both clockwise and counter-clockwise directions
• LCD display shows kg/cm, kg/m, lb-in, lb-ft, N/m
• Audible torque confirmation by means of buzzer
• Easy to set up Peak or Trace modes
• Anti-slip soft grip
WARNING
• Please use the torque wrench in a clean and dry place only.
• Do not use organic solvents to clean the torque wrench.
• Clean the torque wrench and LCD panel with a soft dry cloth only.
• Keep children and unauthorized persons out of the working area.
• Do not immerse the torque wrench in any liquids.
• Remove the batteries, when the torque wrench is not use for a longer period to avoid t
he
wrench damage.
• Do not disassemble the torque wrench and do not make any changes to the wrench.
• Do not shake or drop the torque wrench.
• Do not leave the wrench at place of over-heating, humidity or direct sun.
BGS 951
BGS 952

Summary

Product Specifications

Model Series Overview

Details specifications for BGS 950, BGS 951, and BGS 952 torque wrenches.

Important Usage Information

Key Features

Safety Warnings

Product Description and Components

Battery Handling and Safety

Function Settings and Operation

Battery Installation and Replacement

Guide for installing and changing 1.5V AAA batteries in the torque wrench.

Power On;Off and Mode Selection

Instructions for switching the device on/off and selecting between trace and peak hold modes.

Torque Unit Selection

Procedure for selecting desired torque units (e.g., kg/cm, N/m).

Setting Target Torque Value

How to set the desired torque value for measurement.

Peak Hold Mode Operation

Details on using peak hold mode for capturing maximum torque.

Track Mode Operation

Explanation of how to use track mode to view real-time torque.

Advanced Function Settings

Backlight Function Control

Instructions on how to turn the LCD backlight on or off.

Automatic Power Shut-off

Information regarding the auto shut-off feature after 80 seconds of inactivity.

Memory Function Usage

Guide to setting up and accessing stored torque measurements (P01-P50).

Environmental Protection and Disposal

Environmental Protection Guidelines

Recommendations for recycling tools, accessories, and packaging.

Battery and Product Disposal

Instructions for responsible disposal of batteries and the product itself.

BGS technic 950 Specifications

General

Model	BGS technic 950
Voltage	18 V
No-load Speed	0-400 / 0-1500 rpm
Chuck Size	13 mm
Battery Capacity	2 Ah