EN
40
CONNECT THE APPLIANCE TO THE POWER MAINS ONLY
WITH AN EARTHED PLUG.
FOR YOUR PERSONAL SAFETY, IT IS ADVISABLE TO
POWER THE APPLIANCE BY MEANS OF A DIFFERENTIAL
SWITCH (RCD), WHOSE OPERATING CURRENT DOES
NOT EXCEED 30MA.
AVOID UNPLUGGING THE APPLIANCE BY PULLING THE
POWER CORD.
WHILE IN USE, THE POWER SOCKET MUST BE EASILY
REACHABLE IN CASE IT IS NECESSARY TO UNPLUG THE
APPLIANCE.
2. Warnings
To Next Page
Loading...
