EN
58
10. Troubleshooting
Problem Cause Solution
It is not possible to
lower the lever.
The capsule is stuck or
badly positioned.
Unplug the machine
from the power mains
and wait for it to cool
down; lift the lever and
remove the capsule
manually. Use a tool,
never use ngers.
The compartment of
used capsules is full.
Empty the compartment.
The capsule falls from its
compartment
The lever is not com-
pletely raised.
Completely lower the
lever and open it until it
gets to its end point.
The machine does not
dispense and both lights
of the pour push buttons
(5-6) blink in red.
there is a plastic capsule
or the capsule seat is
empty.
Remove the plastic
capsule and insert a Bi-
aletti aluminium capsule,
press the pour push but-
tons (5-6) for 3 secs to
return to the dispensing
conditions.
The On/o button blinks
red/green.
The machine requires a
descaling cycle.
Carry out a descaling cy-
cle as per paragraph 8.
The On/o button blinks
red.
No water in the tank. Fill the tank and press
any button to exit the
alarm mode. Press the
espresso or long buttons
to repeat dispensing.
11. Tips for a good coee
• In order to obtain a thicker and more persistent cream, use cups
with an inner ovoid-shape base.
To Next Page
Loading...
