EN
56
9. Energy saving
mode
This appliance was designed in compliance with the European Directives
EC1275/2008 and 2009/125/EC, stating the need to adopt the energy
saving mode.
This appliance features an auto power o function that activates after 10
minutes of downtime if no coee is dispensed.
To restart the machine it is necessary to press the On/O button (4)
located on the front side of the appliance: the machine will start the
pre-heating stage of the boiler (red pour push buttons LEDs and On/O
button) and once it reaches the operating temperature, it will indicate the
ready state (green pour push button LED and On/O button).
TIME OF PRE-HEATING IS BASED ON THE DOWNTIME OF THE MACHINE,
AND CAN LAST UP TO 50 SECONDS.
To Next Page
Loading...
