The Plenum Box 12x12 is a fire-resistant enclosure used to install a variety of Biamp
devices in plenum spaces. The Biamp Plenum Box 12x12 is UL2043 compliant and is
approved for use in air-handling plenums. This product also meets Chicago Building
Code Chapter 14E-3 requirements for use in a plenum space within the city of Chicago.
Cooling
All models of TesiraFORTÉ X are actively cooled by a variable speed fan. Air enters the right side and exits the left side
of the unit when viewed from the front. When the unit is wall mounted the orientation is not enforced, but best cooling
performance (convection plus fan assistance) will happen when the left side is pointing up.
Hardware bundles
TesiraFORTÉ X is available in hardware bundles for different room sizes to make installation fast and easy.
Medium room (4.5m x 6m (27 m
2
or 290 ft
2
), 8-11 people)
o MRB-M-X400-C - Ceiling mic: TesiraFORTÉ X 400, (1) TCM-XA, and (1) pair of C-IC6 plus cables.
o MRB-M-X400-T - Table mic: TesiraFORTÉ X 400, (1) AMP-450BP, (1) TTM-X, and (1) pair of C-IC6 plus cables.
Large room (4.5m x 8.5m (38.25 m
2
or 412 ft
2
), 12-18 people)
o MRB-L-X400-C - Ceiling mic: TesiraFORTÉ X 400, (1) TCM-XA, (1) TCM-XEX, and (2) pair of C-IC6 plus cables.
o MRB-L-X400-T - Table mic: TesiraFORTÉ X 400, (1) AMP-450BP, (1) TTM-X, (1) TTM-XEX and (2) pair of C-IC6
plus cables.
Block family
A new TesiraFORTÉ
X block family is
available in
Tesira software version 4.0 and higher.
TesiraFORTÉ X devices allow the selection of 4, 8, or 16 channels of AEC when the block is placed. When devices are
assigned in the Equipment Table the actual hardware device needs to match or exceed the AEC channel count defined
https://support.biamp.com/Tesira/Miscellaneous/TesiraFORTE_X
Updated: Thu, 01 Dec 2022 17:48:44 GMT
Powered by
14
To Next Page
Loading...
