Saddle
Bicicapace uses saddles that guaran-
tee high comfort for everyday use.
Optimal adjustment of the saddle
allow you to not feel any uncomfort.
Setting the bike to suit your
needs requires experience, suitable
tools and manual skills. All adjust-
ments should therefore be
made by a specialist mechanic.
As guideline, the right position of the
saddle is when your knee creates a
175° angle, in the maximum extension,
during the ride.
Do not use the bike if the seatpost is
set over the indicated mark. This mark
has to not be visible, otherwise may be
broken!
Bicicapace recommend to not cut the
seatpost and to tighten the collar to
the torque stated.
Stem
Bicicapace uses adjustable stems for
your own needs.
During the adjustment you have to
decide the inclination that offers you
maximum comfort while riding.
After changes in the handlebar
position, verify that the cables lenght
suits with the new conguration,
in order to not have danger while
braking.
Bad setting of handlebar could you
lose control of your bike while riding.
Any adjustment should therefore be
made by a specialist mechanic.
For indications on torque, refer to the
appropriate section.
After changes in inclination of the
stem is important to remember to
rotate the handlebar to make levers
and grips suit with the new position.
To Next Page
Loading...