Cleaning of Water Pipe Filter
Cleaning of Nozzle
Cleaning of Bidet Body
1. Exterior surface of bidet is made of plastic
material, which may be damaged by scrubber,
chemicals, etc.
2. Wipe the product surface with a soft cloth
dampened with room temperature water and if
needed a pea size amount of soap labeled, "for
use on all surfaces." Then remove all residue of
soap with a clean sponge or soft cloth
dampened with room temperature water. Do
not spray water directly onto the surface
3. Clean the body after removing the power
plug from the outlet. Be sure no water splashes
to the power plug or outlet. Don’t touch the
power outlet with wet hands. Risk of electric
shock.
4. Risk of damage. Be careful to not drop any
chemical detergents or toilet cleaner on the
water supply hose or rest of the product. Do
not to close the cover before the cleaning agent
in the ceramic toilet bowel is completely
washed away otherwise the surface of the
product may be corroded by the evaporation
of the cleaning agent.
5. The deodorizer cartridge can be cleaned
from time to time with a dry, soft brush to
remove any dust build-up on the surface. It
does not need to be replaced.
1. Close the water valve by turning it clockwise.
2. Disconnect the water supply hose. Take the
screen filter out and clean it with a soft brush.
(e.g. toothbrush)
3. After cleaning, place it back. Then connect the
water supply hose.
4. Open the water valve by turning it
counter-clockwise.
Maintenance During Winter
Season
When bidet seat is not used for an extended
period of time, either; Leave unit plugged in and
turned on OR unplugged and drain the unit.
1. Press the Wash button for 3 sec., and then the
nozzle will move forward and stop (for 2 minutes)
2. Clean the nozzle with an unused toothbrush,
etc., and press the Stop button, then it will
return to the original place for self cleaning.
Do Not Throw Away
We are committed to protect the environment.
Please help us by disposing of this product in a
responsible way when it reaches the end of its
service life, to prevent certain substances
contained in electric and electronic products
from harming public health or the environment.
The symbol means that the products may not be
thrown away with other household waste: at the
end of its service life, it may be taken at no
charge to you to the waste collection centers
provided for the purpose by the authorities in
your country. It may be taken to the distributor
from whom you purchase a new product that is
equivalent to or that performs the same
functions as this product. This later option may
not be available in some countries.
1. Remove the power plug from the outlet.
2. Close the water feed valve by turning it
clockwise.
3. Press the release button on the side of main
body.
Draining of Hot Water Tank
Screen Filter
Water Supply Hose
Maintenance & Cleaning
8
To Next Page
Loading...
