Different error code is corresponding with different fault information,
please see the last page Error code table for details.
Display return to normal only after problem being fixed and bike
will not run before fixing the problem.
6SET OPEARATION
If there is no operation after you enter the set interface, it will auto exit.
6.1 Reset trip distance
Hold UP and DOWN for 2 seconds to clear trip distance. It will be auto
cleared when the trip distance exceeds 2550 km.
6.2 Reset ODO
Hold DOWN for 20 seconds to clear the total riding distance. It will be
auto cleared when the total riding distance exceeds 9999 km.
※ This function only for OEMs and distributors use.
6.3 Wheel diameter setting
Hold UP and DOWN for 10 seconds to enter into wheel diameter setting.
Select the accurate wheel diameter value to ensure the accuracy of
display about speed and mileage.
To Next Page
Loading...
