Need help?Do you have a question about the BIGSTONE C300-LCD and is the answer not in the manual?
General| Screen Size | 30 inches |
|---|---|
| Panel Type | IPS |
| VESA Mount | 100 x 100 mm |
| Response Time | 5ms |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178°/178° |
| Connectivity | HDMI, DisplayPort, VGA |
| Ports | 1 x HDMI, 1 x DisplayPort, 1 x VGA |
Provides an overview of the display's physical dimensions and appearance.
Details the materials used (ABS, nylon) and color of the C300 display.
Illustrates the complete display layout and all its icons.
Shows the standard display layout for everyday operation.
Instructions for turning the display on, off, and managing the backlight.
Explains how the discharging current of the controller is represented on the display.
Describes the display of the e-bike's current riding speed.
How to select between Kilometers per hour and Miles per hour for units.
Details how to turn the backlight on and off using the ON/OFF button.
Explains the power assist walk mode, where the e-bike moves at 6 km/h.
Guide on changing the assist levels from 1 to 6 for power output.
Describes how error codes are displayed and what they signify.
Introduction to setting functions, including resetting trip data.
How to set wheel diameter for accurate speed and mileage display.
Procedure for setting the maximum speed limit and its effect on power.
Instructions to switch between KM/H and MPH units for speed and mileage.
How to set a limited current value for the motor.
Procedure to check the communication protocol software version number.
Details how the ODO records the total driving mileage.
Explains the trip distance recording feature.
Ensures connectors are properly joined before powering on the e-bike.
Step-by-step guide on how to mount the display unit onto the handlebar.
Details the warranty period and conditions for quality problems.
Lists items and conditions that are excluded from the warranty scope.
To Next Page
