www.bigstone-nj.com
Address：NO.38 Ningliu Road, Pukou District, Nanjing City, China
Tel：025-89618445
Fax：025 – 58849541
Email: bigstone.ebike@gmail.com
page 6
NORMAL OPERATION
1
、
MODE
Hold MODE and start the display. The display will provide power
for the controller. Hold MODE again can open the backlight. With
display on, press MODE for 1.5 seconds to turn off the power. With the
display off, there is no battery consumption. The leakage current is no
more than 2 µA.
※
The panel will go to sleep when speed is less than 2 km/h for 5
minutes.
、
2 CURRENT DISPLAY
That represents the discharging current of the controller currently, each
segment is 2A, six segments is >=12A.
、
3 SPEED DISPLAY
It displays the current riding speed of e-bike. The speed display is as
below.
To Next Page
Loading...
