www.bigstone-nj.com
Address：NO.38 Ningliu Road, Pukou District, Nanjing City, China
Tel：025-89618445
Fax：025 – 58849541
Email: bigstone.ebike@gmail.com
0 or 1.
10.2.4、
P4: Handlebar Startup Setting
P4 is handlebar startup setting, when P4 setting is 1, indicating the
handlebar is under "non-zero startup" mode, namely, the handlebar can be
effective only after startup the foot power assist. When P4 setting is 0,
indicating the handlebar is under "zero startup" mode, the motor can be
startup by the handlebar directly.
10.2.4、P5: Handlebar Startup Setting
P5 is handlebar function setting, the setting range is 0-4, hold UP or
DOWN for selection.
P5 parameter definition table：
To Next Page
Loading...
