BIGSTONE C500B-LCD - C Parameter Setting; C1: Power-Assist Sensor and Parameter Select Setting

www.bigstone-nj.com
Address：NO.38 Ningliu Road, Pukou District, Nanjing City, China
Tel：025-89618445
Fax：025 – 58849541
Email: bigstone.ebike@gmail.com
page
16
0
zero startup handlebar
Non-zero startup handlebar
1
Zero startup, handlebar speed limit
is 6Km/h
Before power assist, the handlebar
speed limit is 6Km/h, after power
assist, handlebar is full speed.
2
Zero startup, handlebar speed limit
is specified
Non-zero startup, handlebar is
specified speed limit.
3
Zero startup, Zero gear effectively
Before power assist, the handlebar
speed limit is 6Km/h, after power
assist, handlebar is full speed. Stop
power assist, return the handlebar
speed limit is 6Km/h.
4
Handlebar gears is distinguished
according to the display meter.
Non-zero startup handlebar,
Handlebar gears is distinguished
according to the display meter.
10.2.4、
P6: Handlebar Speed Setting
Select the accurate handle speed limit value to ensure current speed
is no more than top speed at current handle level.