BIGTREETECH EBB36 CAN V1.1 User Manual

BIGTREETECH
5 / 22
12. The adaptor board is equipped with terminals, female reeds, double-way
studs and screws, which are required for DIY, greatly meeting the DIY needs
of customers.
13. Support CAN bus connection, which has long data transmission, strong anti-
noise ability, strong real-time performance and high reliability.
1.2 Product Parameters
1. Product Size: 51.5 x 37mm, for further details please read: BIGTREETECH
EBB36 CAN V1.1-SIZE.pdf
2. Installation Dimensions: Hole Spacing 43.85mm, M3 Screw Hole x 2
3. Microprocessor: ARM Cortex-M0+ STM32G0B1CBT6 64MHz
4. Input Voltage: DC12V-DC24V 6A
5. Logic Voltage: DC 3.3V
6. Heating Interface: Heater Cartridge (E0), maximum output current: 5A
7. Onboard Sensor: ADXL345
8. Fan Interfaces: Two CNC Fans (FAN0, FAN1)
9. Maximum Output Current of Fan Interface: 1A
10. Expansion Interfaces: EndStop, I2C, Probe, RGB, PT100/PT1000, USB
Interface, CAN Interface
11. Motor Drive: Onboard TMC2209, Hardware Address: 00, Rsense: 0.11R
12. Driver Working Mode: UART
13. Stepper Motor Interface: E
14. Temperature Sensor Interface Optional: One for 100K NTC or PT1000(TH0),
one for PT100/PT1000
15. USB Communication Interface: USB-Type-C
16. DC-DC 5V Maximum Output Current: 1A
1.3 Firmware Support
This product currently only supports Klipper.

BIGTREETECH EBB36 CAN V1.1 Specifications

General

Brand	BIGTREETECH
Model	EBB36 CAN V1.1
Category	Microcontrollers
Language	English