Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
3. The correct jumper cap can be used normally only when the correct jumper cap
is selected;
4. It must be connected to dcin to work. Dcin can be DC12V or DC24V;
5. Before use, the motherboard firmware needs to adjust the three new driver pins
in order to work normally.
If you encounter other problems, please contact us. We will definitely
answer your questions patiently. If you have any good suggestions on our
products, please give us feedback. We will consider them seriously.
Thank you for choosing BIGTREETECH products!
To Previous Page
Loading...
Need help?
General
