Need help?Do you have a question about the BIGTREETECH SKR MINI MZ V1.0 and is the answer not in the manual?
General| Architecture | ARM Cortex-M3 |
|---|---|
| Processor Speed/Clock Frequency | 72 MHz |
| Input Voltage | 12V - 24V |
| Fan Outputs | 2 |
| SD Card Slot | Yes |
| Firmware Support | Marlin |
| Motor Driver Socket | TMC2209 |
| Stepper Driver Support | TMC2209, TMC2208, DRV8825, A4988 |
| Endstop Inputs | 6 |
| Display | LCD2004 |
| Connectivity | USB |
Details the core technical specifications and capabilities of the SKR MINI MZ V1.0 motherboard, covering MCU, firmware, and key functionalities.
Lists detailed parameters including appearance size, installation dimensions, microprocessor, power voltage, and driver integration.
Illustrates and describes the proper method for connecting a DC power supply to the motherboard.
Details the connection of a switch power supply, including essential safety precautions.
Explains how to connect the motherboard to a computer via USB and install the necessary drivers for recognition.
Provides a detailed diagram illustrating the physical dimensions and component layout of the motherboard.
Presents a clear illustration of the pinout and connection points for various interfaces on the motherboard.
Details the pin assignments for each connector and header on the motherboard for precise connections.
Instructions for configuring the Filament Break Detection function using jumper caps.
Guidance on using jumper caps to enable the BOOT mode for the motherboard.
Confirms support for the company's open-source Marlin 2.0 firmware and where to find it.
Step-by-step guide on how to update the motherboard firmware using Marlin 2.0.
Important notes regarding firmware compatibility, U disk function, power supply, and file naming conventions.
Critical warnings about power supply polarity, simultaneous power sources, and ensuring secure connections.
Information on the reserved heat bed function and requirements for its use, including power supply.
To Next Page
