To Next Page

To Previous Page

VoIP/(802.11g) ADSL2+ (VPN) Firewall Router

Chapter 3: Basic Installation

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out

what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP (Fixed IP

Address) and PPPoE.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,

and Domain Name System (DNS) IP address (it ca be automatically assigned

by your ISP when you connect or be set manually).

PPPoE / PPPoE

with Pass-through

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service Name,

and Domain Name System (DNS) IP address (it ca be automatically assigned

by your ISP when you connect or be set manually). In addition, additional

WAN address can be assigned using PPPoE dialer.

PPPoA

VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain

Name System (DNS) IP address (it ca be automatically assigned by your ISP

when you connect or be set manually).

RFC 1483 Bridged VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

RFC 1483 Routed

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

IPoA Routed

(IP over ATM)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

Billion Router User Manual

Questions and Answers: