How to reset my Billion Network Router password?
If you've forgotten your login or password for your Billion Network Router, first try the default login and password. If that doesn't work, you can restore the router to its factory settings by holding the Reset button on the back for more than 6 seconds. Important: After holding the RESET button for more than 6 seconds, power cycle the device.
Why does my Billion Network Router keep disconnecting?
If your Billion Network Router frequently loses its ADSL connection, make sure all other devices connected to the same phone line (like phones, fax machines, or analog modems) have a line filter between them and the wall socket. This excludes setups with a Central Splitter or Central Filter installed by a qualified electrician. Also, double-check that all line filters are correctly installed.
What to do if I can't ping any PCs on the LAN using my Billion Network Router?
If you can't ping any PCs on the LAN with your Billion Network Router, first, check the Ethernet LEDs on the front panel. An LED should be lit for each port with a PC connected. If an LED is off, inspect the cable between your router and the PC. Temporarily uninstall any software firewalls for troubleshooting. Also, confirm that the IP address and subnet mask settings are consistent between the router and the workstations.
How to fix Billion Network Router PVC connection initialization failure?
If the PVC connection (“linesync”) initialization fails on your Billion Network Router, ensure the telephone cable is correctly connected from the ADSL port to the wall jack. The ADSL LED on the router's front panel should be lit. Verify that your VPI, VCI, encapsulation type, and multiplexing settings match those provided by your ISP. Reboot the router. If issues persist, confirm these settings with your ISP.
What to do if no LEDs are on when I turn on my Billion Network Router?
If none of the LEDs are on when you turn on your Billion Network Router, check the connection between the adapter and the router. If the problem continues, it might be a hardware issue.
Details on the router's key functionalities including VoIP, ADSL, VPN, Wireless, and Ethernet.
Explains the router's support for cost-effective, toll-quality voice calls using the SIP protocol.
Details on establishing secure data transmission tunnels using PPTP, L2TP, IKE, and IPSec.
Explains the integrated wireless access point for wired/wireless network connectivity and security.
Lists supported protocols like PPPoA, RFC 1483, and PPP over Ethernet for ISP connection.
Details the SPI firewall for hacker protection and Network Address Translation (NAT).
Explains QoS for prioritizing traffic and Virtual Server for port forwarding.
Lists crucial warnings and precautions for using the router safely and correctly.
Details all the items included in the router package for user reference.
Explains the meaning and status indication of each LED on the router's front panel.
Describes the function of each port located on the router's rear panel.
Provides guidance on proper cabling and connections for optimal ADSL and network performance.
Steps for configuring PC network settings in Windows for router access.
Illustrates the physical connections for the router to the ADSL and LAN networks.
Details the default IP address, username, password, and essential settings.
Lists essential connection details needed from the Internet Service Provider for setup.
Guides users on accessing and logging into the router's web interface for configuration.
Displays system status, logs, and diagnostic tools for monitoring and troubleshooting.
Configures WAN, ADSL, LAN connections and various network protocols.
Settings for the wireless access point, including security and distribution system.
Comprehensive firewall settings and VPN configuration options for network protection.
Configuration for Voice over IP services and Quality of Service management.
Manages advanced features like Time Schedule, Dynamic DNS, and Device Management.
Procedures for saving settings to flash memory and safely exiting the configuration interface.
Troubleshooting steps for issues like no LEDs on power-up or forgotten login credentials.
Solutions for failed PVC connection initialization and frequent ADSL line disconnections.
Troubleshooting steps for issues like inability to ping PCs on the LAN.
General| Brand | Billion |
|---|---|
| Model | Router |
| Category | Network Router |
| Language | English |
To Next Page