VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
32
Ethernet Client Filter
The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage your
network control to accept traffic from specific authorized machines or can restrict unwanted machine(s) to
access your LAN.
There are no pre-define Ethernet MAC address filter rules; you can add the filter rules to meet your
requirements.
Ethernet Client Filter: Default setting is set to Disable.
~ Allowed: check to authorize specific device accessing your LAN by insert the MAC Address in
the space provided or click
. Make sure your PC’s MAC is listed.
~ Blocked: check to prevent unwanted device accessing your LAN by insert the MAC Address in
the space provided or click
. Make sure your PC’s MAC is not listed.
The maximum client is 16. The MAC addresses are 6 bytes long; they are presented only in
hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: automatically detects devices connected to the router through the Ethernet. .
→ Active PC in LAN
To Next Page
Loading...
Need help?
General
