VoIP/(802.11g) ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
37
Wireless Client / MAC Address Filter (Wireless Router only)
The MAC Address supports up to 16 wireless network machines and helps you to manage your network
control to accept traffic from specific authorized machines or to restrict unwanted machine(s) to access
your LAN.
There are no pre-define MAC Address filter rules; you can add the filter rules to meet your requirements.
Wireless Client Filter: Default setting is set to Disable.
~ Allowed: To authorize specific device accessing your LAN by insert the MAC Address in the
space provided or click
. Make sure your PC’s MAC is listed.
~ Blocked: To prevent unwanted device accessing the LAN by insert the MAC Address in the
space provided or click
. Make sure your PC’s MAC is not listed.
The maximum client is 16. The MAC addresses are 6 bytes long; they are presented only in
hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
The maximum client is 16. The MAC addresses are 6 bytes long; they are presented only in
hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: it automatically detects devices connected to the router through the Wireless. .
→Associated Wireless Clients
Associate Wireless Client displays a list of individual wireless device’s MAC Address that currently
connects to the router.
You can easily by checking the box next to the MAC address to be blocked or allowed. Then, Add to
insert to the Wireless Client (MAC Address) Filter table. The maximum Wireless client is 16.
To Next Page
Loading...
Need help?
General
