3
Device Overview
SG3010/SG3015-T1
1
Power Plug
(100-240V)
Put the plug in the socket.
2
Meter Status
Indicator
Lit green when the device is not connected.
Blinking when the device is connected.
3
Power Meter
Setting Hidden
Button
Press this button to detect signal strength.
Blinking green 5 times when the signal achieves the highest level;
Blinking orange once when the signal is in the lowest level.
4 Energy Indicator
Note: It will ash once when electricity consumption has
accumulated to 1wh (0.001kWh).
5 Power Outlet
Insert the plug of an electrical appliance that you intended to
monitor into the product’s outlet.
To Next Page
Loading...