EasyManua.ls Logo

Billyoh Lollipop Max Playhouse User Manual

Billyoh Lollipop Max Playhouse
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
V7.3-220120
2) Reacquaint
yourself with the
parts, QTy’s and
Sizes on the
PACKING LIST.
PACKING
LIST
1) Take 5
minutes
and have
a coffee.
3) Read the
instructions
thoroughly and
then re-read if
necessary.
BEFORE
YOU
START
CODE:
INS-0072
Lollipop Max Playhouse Building Instructions
Please read the instructions carefully
and please retain for future reference
Please note that all images are for illustration purposes only.
For Queries and Help please contact Product Support: 01909 768 858
Pre - Treated
ADULT ASSEMBLY ONLY
MINIMUM 2 PEOPLE
50kg
MAXIMUM USER
WEIGHT
MANUFACTURING ADDRESS:
Kybotech, Claylands Avenue, Worksop S81 7BQ
WARNINGS
1) Only for domestic use.
2) Outdoor use only.
3) Not suitable for children
under 36 months - Small parts.
Choking
Hazard
Question and Answer IconNeed help?

Do you have a question about the Billyoh Lollipop Max Playhouse and is the answer not in the manual?

Billyoh Lollipop Max Playhouse Specifications

General IconGeneral
TypePlayhouse
MaterialWood
StyleTraditional
ColorNatural wood
Assembly RequiredYes
Roof TypeApex
Recommended Age3 years and up
WindowsFixed Styrene Windows
DoorSingle Door
FloorIncluded

Summary

Lollipop Max Playhouse Building Instructions

Warnings and Safety Precautions

Critical warnings for domestic use, outdoor safety, and choking hazards for children under 36 months.

Important Safety Notices

Safe Assembly Tips

Essential tips for safe construction, including adult assembly, proper tools, and site conditions.

Maintenance and Product Care

Guidelines for maintaining the building's integrity and safety throughout its lifespan.

General Recommendations and Assembly Guidance

Additional Playhouse Safety Rules

Specific safety guidelines for playhouses, including age suitability and user weight limits.

Product Maintenance Checklist

Base Preparation and Protection

Ensuring a firm, level base and protection from moisture is key to maintaining the building.

Troubleshooting Guide

Building a Base

Base Construction Options

Guidance on constructing a concrete base or using an optional pressure-treated base.

Playhouse Tower Leg Protection

Protecting Tower Legs from Moisture

Recommendations for protecting playhouse tower legs from ground moisture and ensuring longevity.

Assembly Preparation and Floor Details

Pilot Drilling Importance

Guidance on pre-drilling holes to prevent wood splitting during screw insertion.

Base Construction Steps

Assembling the Base Frame

Step-by-step instructions for constructing the base frame using joists and screws.

Securing the Base to the Ground

Fixing the base frame to the ground using pressure-treated spikes and ensuring it is level.

Installing the Playhouse Floor Sections

Aligning and fixing the floor sections (FSS) to the assembled base frame.

Wall Panel Assembly

Roof Structure Assembly

Installing Roof Trusses and Purlins

Placing roof trusses (TRU) and fixing eaves purlins (EP) and centre purlins (CP).

Roof Panel Installation

Securing Roof Panels

Fixing each roof panel (RSS) to the building's sides and gables using nails.

Finishing Touches and Door Hardware

Cover Strip and Safety Block Fitting

Applying cover strips (CS) and fitting the door safety block (DSB) for finger protection.

Roof Board Installation

Related product manuals