Bilt DWO-5 - Enabling;Disabling Voice Prompts

25
4. Call a phone number you want to assign
and you will hear a voice prompt, “Save
speed dial (#)”. The phone number is
automatically assigned to the selected
speed dial number. Then the phone call will
hang up before being connected.
5. To exit the menu, tap the (+) Button or the
(-) Button until you hear a voice prompt,
“Cancel”, and tap the Center Button
toconrm.Youwillthenhearavoice
prompt, “Cancel”. If no button is pressed
within 1 minute, the headset will exit the
congurationmenuandgobacktostand-
by mode.
Note:
After assigning a phone number to one of
three speed dials, you can continually assign
another phone number to the rest of two
speed dials.
8.6 Enabling/Disabling Voice
Prompts
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable/Disable Tap the Center Button
You can disable voice prompts by
congurationsetting,butthefollowingvoice
prompts are always on.
•Voicepromptsforcongurationsettingmenu
•Voice prompts for battery level indicator
•Voice prompts for speed dial