Bilt DWO-5 User Manual

8
6. If the pairing process is not completed
within three minutes, the headset will return
to stand-by mode.
Note:
1. If the Bluetooth connection between the
headset and a mobile phone is
disconnected, press the Center Button for 3
seconds to recover the Bluetooth
connection immediately.
2. If the Bluetooth connection between the
headset and a media player is
disconnected, press the Center Button for 1
second to recover the Bluetooth connection
and play.
2.2 Multipoint Pairing - Second
Mobile Phone, GPS, and SR10
1. Press and hold the Center Button for 12
seconds until you hear a voice prompt,
“Conguration menu”.
2. Tap the (+) Button until you hear a voice
prompt, “Multipoint pairing”.
3. Search for Bluetooth devices on the HFP
device. Select the BiLT DWO-5 in the list of
the devices detected on the HFP device.
4. Enter 0000 for the PIN. Some HFP devices
may not ask for the PIN.
5. TheHFPdeviceconrmsthatthepairing
is completed and the headset is ready to
use. You will hear a voice prompt, “Your
headset is paired”.

Bilt DWO-5 Specifications

General

Brand	Bilt
Model	DWO-5
Category	Headsets
Language	English