Bilt DWO-5 - Mobile Phone Pairing Configuration; Multipoint Phone Pairing Configuration

23
8.1 Mobile Phone Pairing
Voice Prompt
“Phone pairing”
Factory Default N/A
To go into mobile phone pairing mode, tap the
(+) Button or the (-) Button until you hear the
voice prompt, “Phone pairing”. Please refer to
section 2.1 for details on mobile phone pairing.
If you tap the (+) Button or the (-) Button, you
can exit from the phone pairing mode.
8.2 Multipoint Phone Pairing
Voice Prompt
"Multipoint pairing"
Factory Default N/A
To go into multipoint pairing mode, tap the (+)
Button or the (-) Button until you hear the voice
prompt, “Multipoint pairing”. Please refer to
section 2.2 for details on second mobile phone
pairing. If you tap the (+) Button or the (-)
Button, you can exit from the second mobile
phone pairing mode.
8.3 Phone Selective Pairing
Voice Prompt
"Phone selective
pairing"
Factory Default N/A
To go into phone selective pairing mode, tap
the (+) Button or the (-) Button until you hear
the voice prompt, “Phone selective pairing”.
Please refer to section 2.3.2 for details on
phone selective pairing. If you tap the (+)
Button or the (-) Button, you can exit from the
phone selective pairing mode.