Bilt DWO-5 User Manual

5
1.3 Charging
You can charge the headset by connecting the
supplied USB power & data cable into a
computer’s USB port or USB wall charger. You
can use any standard micro USB cable to
charge the unit. You can also charge them on
the road using the cigarette charger. The
charging LED turns red while charging and
turns blue when fully charged. It takes about
2.5 hours to be completely charged.
or
AC Adapter
1.4 Checking the Battery Level
1.4.1 LED Indicator
When the headset or the Handlebar Remote is
poweringon,theirredLEDashesrapidly
indicating the battery level.
4ashes=High,70~100%
3ashes=Medium,30~70%
2ashes=Low,0~30%
1.4.2 Voice Prompt Indicator
When you power on the headset, keep
pressing the Center Button and the (+) Button
simultaneously for about 5 seconds until you
hear three, high toned beeps. Then you will
hear a voice prompt indicating the battery
level. However, if you release the buttons as
soon as the headset turns on, you will not hear
the voice prompt for the battery level
indication.

Bilt DWO-5 Specifications

General

Brand	Bilt
Model	DWO-5
Category	Headsets
Language	English