Binatone IHOME PHONE - User Manual

1
iHome Phone – Quick Start Guide
For a full explanation of all features and instructions, please refer to the User's Guide.
1 Setting up your iHome Phone
A. Attach the stand to DECT base station
1. Insert the stand into the locking grooves at bottom of the DECT
base station.
2. Twist the stand slightly until the stand is firmly secured to the
DECT base station.
B. Connect the power cable and telephone line cord
1. Plug the power cable and telephone line cord to the power jack
and phone jack at the bottom of the DECT base station.
2. Plug the other end into a power and telephone wall socket.
Ihomephone_QSG_EN.fm Page 1 Tuesday, September 28, 2010 7:07 PM

Summary

Setting up your iHome Phone

Attach the stand to DECT base station

Insert the stand into locking grooves at the bottom and twist until firmly secured.

Connect the power cable and telephone line cord

Plug cables into the base station's power and phone jacks, then into wall sockets.

Device Component Handling

Installing the battery

Phone Operation and Charging

Charge your iHome Phone

Place the handset on the DECT base station to charge for at least 6 hours.

Switching on your iHome Phone

Press and hold the power button until the Android logo is displayed on screen.

Switching off your iHome Phone

Press and hold power, select Power Off from the menu, and confirm.

Network Connectivity

Making a Wireless Connection

Connect the iHome Phone to a Wi-Fi network by selecting it and entering the password.

Binatone IHOME PHONE Specifications

General

Brand	Binatone
Model	IHOME PHONE
Category	Telephone
Language	English