To Next PageTo Next PageWhy can't callers leave messages on my Binatone Telephone?
If the Binatone Telephone caller cannot leave a message, the answering machine might be turned off, the message memory might be full, or the answering mode might be set to 'Answer Only'. To resolve this: * Turn on the answering machine. * Erase unnecessary messages to free up memory. * Change the mode to 'Answer & Record'.
How to fix no display on Binatone cordless Telephone handset?
If there is no display on your Binatone cordless handset, the battery may be empty. Recharge the cordless handset battery. If there is no display on the base, make sure the mains adapter is firmly plugged into a mains socket and into the base unit.
Why can't I operate my Binatone Speakeasy Combo 3865 Twin answering machine remotely?
If you cannot operate the answering machine of your Binatone Telephone remotely, consider the following possible causes: 1. You might be entering the wrong remote access code. If you forget the remote access code, reset to the default settings. 2. You might be pressing the dial keys too quickly. Press each key firmly. 3. You might be using a pulse telephone. Try again using a touch tone phone. 4. The remote access feature might not be activated. Activate the remote access feature.
How to fix no dialling tone on Binatone Telephone?
If you don't hear a dialling tone when pressing the key on your Binatone Telephone, check the following: * Ensure the connection cord of the base station is plugged in. Unplug and plug back in the mains, and check that the telephone line cord is plugged into both the base station and the phone socket. * Verify the mains adapter is firmly plugged into the mains socket and into the base station. * Wait until another handset is not using the base to make a call. * Use the original line cord supplied.
Why does my Binatone Speakeasy Combo 3865 Twin say 'searching'?
If 'SEARCHING' is displayed on the cordless handset of your Binatone Telephone, it could be due to the base station being out of range or not connected to the mains. Try reducing the range or connecting the base station to the mains.
Why does my Binatone Telephone stop recording when it rings?
If your Binatone Telephone rings and stops recording while you are recording an outgoing message or listening to messages, it is because a call is being received. Answer the incoming call and try again to record your outgoing message later.
General